Image Fitness 2-in-1 Elliptical English Manual - Page 12

10. Identify the Right Crank Axle (16). Apply grease to the Right Crank Axle (16) and to a Wave Washer (73). Then, slide the Wave Washer onto the Right Crank Axle. Insert the Right Crank Axle (16) into the right Pedal Arm Bracket (44), and firmly tighten the Right Crank Axle clockwise into the right arm of the Crank (18). Next, firmly tighten the Right Crank Locknut (36) with an M12 Split Washer (74) onto the Right Crank Axle (16). Then, press a 19mm Dome Cap (84) onto the Split Washer. Repeat this step on the left side of the elliptical. Note: Turn the Left Crank Axle (not shown) counterclockwise to tighten it, and use the Left Crank Locknut (not shown). 10 84 36 74 18 44 73 Grease 16 11. Apply grease to an M10 x 70mm Bolt (60). 11 Attach the right Pedal Arm (11) to the right Upper Body Leg (64) with the M10 x 70mm Bolt (60), two M10 Washers (92), two M10 Plastic Washers (62), and an M10 Locknut (93) as shown. Note: Place the Plastic Washers between the right Upper Body Leg and the right Pedal Arm. Press a 17mm Dome Cap (14) firmly onto each M10 Washer (92). Attach the left Pedal Arm (11) to the left Upper Body Leg (64) in the same way. 64 11 14 93 64 92 62 92 60 14 11 Grease 12