Image Fitness 2-in-1 Elliptical English Manual - Page 7
Assembly - trainers
View all Image Fitness 2-in-1 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
ASSEMBLY • To hire an authorized service technician to assemble the hybrid trainer, call 1-800-445-2480. • Assembly requires two persons. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you nish assembly. • Left parts are marked "L" or "Left" and right parts are marked "R" or "Right." • To identify small parts, see page 6. • In addition to the included tool(s), assembly requires the following tools: one Phillips screwdriver one adjustable wrench one rubber mallet Assembly may be easier if you have a set of wrenches. To avoid damaging parts, do not use power tools. 1. Go to www.workoutwarehouse.com/ registration on your computer and register 1 your product. • activates your warranty • saves you time if you ever need to contact Customer Care • allows us to notify you of upgrades and offers Note: If you do not have Internet access, call Customer Care (see the front cover of this manual) and register your product. 2. Identify the Rear Stabilizer (28), which has a Leveling Cap (33) on each end. While a second person lifts the rear of the Frame (1), attach the Rear Stabilizer (28) to the Frame with two M8 x 65mm Carriage Bolts (51), two M8 Curved Washers (81), two M8 Split Washers (63), and two M8 Acorn Nuts (58). 2 58 63 81 33 28 51 58 63 1 81 33 7