Image Fitness 2-in-1 Elliptical English Manual - Page 9

Tip: Avoid pinching the Pulse Wires A.

Get Image Fitness 2-in-1 Elliptical PDF manuals and user guides View all Image Fitness 2-in-1 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

5. Tip: Avoid pinching the wires and cables during this step. Slide the Upright (2) onto the Frame (1). Attach the Upright (2) with three M8 x 20mm Screws (54), three M8 Split Washers (63), and three M8 Washers (55). Do not tighten the Screws yet. Then, attach the Upright (2) with two M8 x 60mm Bolts (90), four M8 Washers (55), and two M8 Locknuts (53). Do not tighten the Locknuts yet. 5 Avoid pinching the wires and cables 54 90 63 54 63 55 90 55 2 53 55 63 54 1 53 6. Have a second person hold the Handlebar (52) near the Upright (2). See the inset drawing. Insert the Pulse Wires (A) through the Grommet (99), into the left side of the Upright (2), and pull them out of the top of the Upright. Then, press the Grommet into the left side of the Upright. Tip: Avoid pinching the Pulse Wires (A). Attach the Handlebar (52) to the Upright (2) with two M8 x 35mm Screws (86), two M8 Split Washers (63), and two M8 Washers (55). Then, press the Handlebar Cover (88) onto the Handlebar (52). 6 A 52 86 63 55 2 88 99 A Avoid pinching the Pulse Wires (A) 2 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
9
5.
Tip: Avoid pinching the wires and cables
during this step.
Slide the Upright (2) onto the Frame (1).
Attach the Upright (2) with three M8 x 20mm
Screws (54), three M8 Split Washers (63), and
three M8 Washers (55).
Do not tighten the
Screws yet.
Then, attach the Upright (2) with two M8 x 60mm
Bolts (90), four M8 Washers (55), and two M8
Locknuts (53).
Do not tighten the Locknuts
yet.
5
1
2
54
63
55
53
53
55
55
63
63
54
90
90
54
Avoid pinching the
wires and cables
6.
Have a second person hold the Handlebar (52)
near the Upright (2).
See the inset drawing.
Insert the Pulse Wires
(A) through the Grommet (99), into the left side
of the Upright (2), and pull them out of the top of
the Upright. Then, press the Grommet into the
left side of the Upright.
Tip: Avoid pinching the Pulse Wires (A).
Attach the Handlebar (52) to the Upright (2)
with two M8 x 35mm Screws (86), two M8 Split
Washers (63), and two M8 Washers (55).
Then, press the Handlebar Cover (88) onto the
Handlebar (52).
6
52
A
2
88
86
63
55
Avoid
pinching
the Pulse
Wires (A)
99
A
2