Image Fitness 4.0 Ex Bike Uk Manual - Page 5

ASSEMBLY Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included tools and your own adjustable spanner screwdriver . and Phillips Use the drawings below to identify the small parts used for assembly. The number in parenthesis below each drawing is the key number of the part, from the PART LIST on pages 20 and 21. The number following the key number is the quantity needed for assembly. Note: Some small parts may have been pre-assembled. If a part is not in the parts bag, check to see if it has been pre-assembled. M6 Nylon Locknut (63)-4 M8 Nylon Locknut (49)-4 M6 Washer (66)-4 M8 Washer (64)-2 M4 x 12mm Screw (41)-6 M4 x 16mm Screw (57)-1 M4 x 20mm Screw (101)-1 M6 x 16mm Button Screw (8)-4 M6 x 22mm Button Screw (93)-3 M6 x 25mm Button Screw (99)-1 M6 x 32mm Button Bolt (102)-4 M8 x 12mm Button Screw (106)-4 M8 x 24mm Button Screw (40)-4 M8 x 38mm Button Bolt (96)-4 M8 x 52mm Button Screw (54)-2 1. Orient the Front Stabiliser (15) as shown. Whilst another person lifts the front of the Frame (1), attach 1 the Front Stabiliser to the Frame with two M8 x 52mm Button Screws (54) and two M8 Washers (64). 1 15 64 54 5