Image Fitness 4.0 Ex Bike Uk Manual - Page 8

8. With the help of another person, carefully tip the exercise cycle onto its left side so it is resting on the left Seat Handlebar (3). Identify the Left Rear Stabiliser (16), which is marked with an "L." Attach the Left Rear Stabiliser and the Stabiliser Plate (87) to the Frame (1) with two M8 x 24mm Button Screws (40) as shown; do not tighten the Button Screws yet. Insert the Right Rear Stabiliser (98) between the Stabiliser Plate (87) and the Frame (1). Attach the Right Rear Stabiliser with two M8 x 24mm Button Screws (40). Tighten all four Button Screws. 8 98 40 40 87 16 1 9. Slide the Collar (107) onto the Left Handlebar (6). Insert the Right Handlebar (5) into the Left Handlebar. Connect the Collar, the Left Handlebar, and the Right Handlebar with an M4 x 16mm Screw (57). Attach the Right and Left Handlebar Brackets (68, 71) to the Upright (2) with four M6 x 32mm Button Bolts (102) and four M6 Nylon Locknuts (63). Do not tighten the Button Bolts and Nylon Locknuts yet. Attach the Right and Left Handlebars (5, 6) to the Right and Left Handlebar Brackets (68, 71) with four M8 x 12mm Button Screws (106). Tighten all the hardware used in this step. Make sure that the M6 Nylon Locknuts (63) are in the hexagonal holes in the Right and Left Handlebar Brackets (68, 71). 9 102 2 71 6 63 3 5 102 106 68 106 63 57 107 10. Identify the Left Pedal (22), which is marked with an "L." Using an adjustable wrench, firmly tighten the Left Pedal counterclockwise into the Left Crank Arm (24). Tighten the Right Pedal (not shown) clockwise into the Right Crank Arm. Important: Tighten both Pedals as firmly as possible. After using the exercise cycle for one week, retighten the Pedals. For best performance, the Pedals must be kept tightened. Adjust the Left Pedal Strap (25) to the desired position, and press the end of the Left Pedal Strap onto the tab on the Left Pedal (22). Adjust the Right Pedal Strap (not shown) in the same way. 10 25 Tab 24 22 8