Insignia NS-1DVDR User Manual (English) - Page 11

To replace the batteries: 1 Press the lock tab of the battery holder and open the battery compartment. 2 Place two AAA batteries in the battery holder, matching the + and - in the battery compartment. 3 Close the battery holder. Caution • Use only the size and type of batteries specified. • Make sure that you follow the correct polarity as indicated in the battery compartment. Reversed batteries may damage the remote control. • Do not mix different types of batteries together (for example, Alkaline and Carbon-Zinc) or old batteries with new ones. • If the remote control is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage. • Do not try to recharge batteries not intended to be recharged. They can overheat and rupture. Using your recorder Turning your recorder on and off To turn your recorder on and off: 1 Plug the power cord into the back of your recorder and into an electrical outlet. 2 Press the POWER button to turn on your recorder. 3 Press the POWER button again to turn off your recorder. Initial Setup Wizard The first time you turn on your recorder, the Initial Setup Wizard opens so you can set the language and clock. To set up your recorder with the Setup Wizard: 1 Use / to select a language for the Setup menu and on-screen display, then press ENTER. 2 Enter the necessary information for year, date, and time. • / (left/right): Moves the cursor to the previous or next column. • / (up/down): Changes the setting at the current cursor position. 3 Press ENTER to confirm your setting. 4 Press ENTER to exit the menu. Note You can reset the Initial Setup Wizard from the Factory Set option in the setup menu (see "General Settings" on page 11). Playing a disc To play a disc: 1 Turn on your recorder. 2 Press OPEN/CLOSE ( ) to open the disc tray. 3 Load the disc into the tray, with the label side up. 4 Press OPEN/CLOSE ( ) to close the tray. Playback starts automatically. If playback does not start, press PLAY ( ) or start the playback using the HOME menu (see "Using the Home Menu" on page 11). 5 To stop the playback, press STOP ( ). 6 The recorder records the stopped point, depending on the disc. appears on the screen briefly. Press PLAY ( ) to resume playback (from the stopped point). If you press STOP ( ) again or unloaded the disc, ( appears on the screen. If you press PLAY ( ), your recorder starts playback at the beginning of the disc. 7 Press OPEN/CLOSE ( ) to open the tray and remove the disc. Press OPEN/CLOSE ( ) to close the disc tray, or press POWER ( ). The disc tray closes automatically and recorder turns off. Note If parental control are set and the DVD is not within the rating settings, you must input the password. (See "Lock (Parental Control) Settings" on page 12). Disc playback features Buttons OPEN/CLOSE () PAUSE ( ) Operations Press to open or close the disc tray. Press to pause playback. Press repeatedly to play frame-by-frame. Note: You can also use the / buttons to step backward or forward while in PAUSE mode. Discs All All DVD ALL www.insignia-products.com 9