Insignia NS-1DVDR User Manual (English) - Page 3

Contents Important safeguards 1 Introduction 2 Features 5 Setting up your recorder 7 Using your recorder 9 Reference 21 Troubleshooting 23 Maintaining 24 Specifications 25 Legal notices 25 1-year limited warranty 27 Français 29 Español 61 Welcome Congratulations on your purchase of this high-quality Insignia product. Your NS-1DVDR DVD Recorder represents the state of the art in DVD recorders and is designed for reliable and trouble-free performance. Warning: To reduce the risk of fire or electric shock, do not expose your recorder to rain or moisture. CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Caution: This product employs a Laser System. To ensure correct use of this product, read this owner's manual carefully and retain it for future reference. Should your recorder require maintenance, contact qualified service personnel. Making adjustments to controls or performing procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM. Caution: Your recorder should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on your recorder. Caution: Class 3B visible and invisible laser radiation when open and interlocks defeated. Do not stare into the beam or view directly with optical instruments. Caution Most recorder manufacturers recommend their recorders be placed upon a dedicated circuit. That is, a single outlet circuit which powers only that recorder and has no additional outlets or branch circuits. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, overloaded extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your recorder, and if its appearance indicates damage or deterioration, unplug it, discontinue use of your recorder, and have the cord replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits your recorder. To disconnect power from the power outlet, pull out the power cord plug. When installing your recorder, make sure that the plug is easily accessible. Important safeguards • Read instructions- Read all the safety and operating instructions before operating your recorder. • Retain instructions-Retain the safety and operating instructions for future reference. • Follow warnings-Follow all warnings on your recorder and in the operating instructions. • Follow instructions-Follow all operating and use instructions. • Cleaning-Unplug your recorder from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. • Attachments-Do not use attachments not recommended by your recorder manufacturer because they may cause hazards. • Water and moisture-Do not use your recorder near water, for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool. • Accessories-Do not place your recorder on an unstable cart, stand, tripod, bracket, or table. Your recorder may fall, causing serious injury to someone and serious damage to your recorder. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with your recorder. If you mount your recorder, follow the manufacturer's instructions and use a mounting accessory recommended by the manufacturer. Move a recorder www.insignia-products.com 1