Insignia NS-24D420NA16 User Manual (English) - Page 26
AV (composite video) (good
View all Insignia NS-24D420NA16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
NS-24D420NA16/NS-24D420MX16 24" 1080p 60Hz, LED TV AV (composite video) (good) Notes • Cables are often color-coded to match color-coded jacks. • The yellow video connector on the AV cable connects to the green VIDEO / Y jack. On your TV AV cable DVD or Blu-ray player AV cable Audio cable connector connectors AV jack Analog audio jacks Back of TV 1 Make sure that your TV's power adapter is unplugged and the DVD or Blu-ray player is turned off. 2 Connect an AV cable (not provided) to the green VIDEO / Y jack and L and R AUDIO jacks on the back of your TV and to the AV OUT jacks on the DVD or Blu-ray player. Important • The VIDEO / Y, PB, and PR video jacks (used to connect a component device) share the L and R AUDIO jacks with the Y / VIDEO jack (used to connect an AV device). You can only connect one component video or AV device at a time. We suggest upgrading to HDMI if your DVD or Blu-ray player supports it. • When you connect the audio using the L and R AUDIO jacks, the audio output is analog. 3 Plug your TV's power adapter into a power outlet, then turn on your TV. 4 Turn on the DVD or Blu-ray player, then set it to the correct output mode. For more information, see the documentation that came with the player. 5 Press INPUT to open the INPUT SOURCE list. 6 Press S or T to highlight Component/AV, then press ENTER. www.insigniaproducts.com 21