Insignia NS-24D420NA16 User Manual (English) - Page 54

NS-24D420NA16/NS-24D420MX16 24" 1080p 60Hz, LED TV Playing TV audio only You can turn off the picture on your TV and listen to the program audio only. 1 Press MENU. 2 Press W or X to highlight CHANNELS, then press T or ENTER. 3 Press S or T to highlight Audio Only, then press ENTER or X. 4 Press S or T to select On. 5 Press MENU, ENTER, or W to return to the previous menu, or press EXIT to close the menu. Notes • The picture turns off in about five seconds. • Audio Only works only when the input source is TV, and your TV is receiving a broadcast signal. • To exit audio only mode, press any button. When you exit audio only mode, the Audio Only option is automatically reset to Off. Changing channel settings This section covers: • Automatically scanning for channels • Hiding channels • Setting up a favorite channel list • Viewing a favorite channel • Adding or changing a channel label • Checking the digital signal strength Automatically scanning for channels When you scan for channels, your TV searches for channels with signals and stores the channel information in the channel list. When you press CH or CH , your TV goes to the next or previous channel in the channel list. If the TV signal source changes, for example you change from an outdoor antenna to cable TV (no box), you need to scan for channels. 1 Press MENU. 2 Press W or X to highlight CHANNELS, then press T or ENTER. 3 Press S or T to highlight Auto Channel Search, then press ENTER or X. 4 Press S or T to highlight Cable/Satellite Box, Cable from the wall, or Antenna, then press ENTER. www.insigniaproducts.com 49