Insignia NS-A1113 User Manual (English) - Page 12

NS-A1113 DVD Executive Shelf System Using your DVD Executive Shelf System Basic operation Preparing Before turning on the system, make sure that all of the connections are correct and secure. 1 Plug the power plugs into the power outlet, then press the Power button on the front panel to turn on the system. At this time, the system is in Standby mode, the Red Indicator light on the front panel is on, and the display shows the current time. 2 Press the Power, FM/AM, Play/Enter, Audio-in, or Eject buttons on the remote control or the Play/Enter, Stop AM/FM, or Eject buttons on the front panel to exit Standby mode. The player enters the mode corresponding to the button you pressed. Note Standby mode is a power-saving mode. However, when you are not going to use the system for a long time, turn off the main power. 3 After exiting Standby mode, press the Eject button on the remote control or front panel to open the disc tray, insert a disc, then press the Eject button again. The system starts to play. Status display While a disc is playing, press the OSD button and the TV screen displays the following: • VCD disc display: Single Elapsed, Single Remain, Total Elapsed, Total Remain, Off • DVD disc display: Title Elapsed, Title Remain, Chapter Elapsed, Chapter Remain, Off Soundtrack switch While playing VCDs or DVCDs, press the L/R(MO/ST) button to select one of the Output modes, such as Mono Left, Mono Right, Mix-Mono, and Stereo. Press the button once to switch one soundtrack. Note While playing DVDs or SVCDs, this button doesn't work. Fast forward and Fast backward While in Play mode, press the Tune-> buttons to fast forward or fast backward. The available speeds are: FORWARD X2, FORWARD X4, FORWARD X8, FORWARD X16, PLAY BACKWARD X2, BACKWARD X4, BACKWARD X8, BACKWARD X16, and PLAY. Previous and Next While in Play mode, press the CH- |> button to skip to the next song. 10 www.insignia-products.com