Insignia NS-IMK20WH7 User Guide - Page 5
Tools and materials needed, Installing the ice maker
View all Insignia NS-IMK20WH7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Tools and materials needed Ice Maker Electric drill with a 1/4" drill bit Putty knife Needle nose pliers or nut driver Adjustable wrench Knife Flat blade screwdriver 1/4" OD copper supply line with compression nuts and ferrules Shut off valve Phillips (non self piercing) screwdriver Water line kit #5303917950 You'll also need: • A freezer shelf to hold the ice storage bin. If your model does not have one, contact your dealer to order one. • Access to a household cold water line with water pressure between 20 and 120 psi. The water line kit (including copper tubing and shut off valve) are available in a kit (#5303917950) from your local hardware or plumbing supply store. Installing the ice maker Your Insignia refrigerator comes set up for ice maker installation. Caution Unplug the refrigerator. To eliminate the danger of electric shock during installation, you must unplug the refrigerator. 1 Unplug the refrigerator from the wall outlet. 2 Remove the freezer shelf and ice tray rack from the freezer. www.insigniaproducts.com 5