Insignia NS-LCD15F User Manual (English) - Page 6

Insignia NS-LCD15F 15" LCD TV # Button Description 15 DISPLAY 16 TV 17 PC 18 RECALL 19 CH 20 AUDIO 21 CH 22 EXIT 23 PICTURE 24 SLEEP Press to display status information. Press to select TV mode. Press to select PC mode. Press to watch the previous channel. Press to change TV channels up. Press to select the sound mode. Press to change TV channels down. Press to close the on-screen menu. Press to change to Video Page. Press to set the sleep timer. For more information, see "Setting the sleep timer" on page 6. Using the remote control To use the remote control: • Point the remote control towards the remote sensor on the front of your TV. Notes • Do not expose the remote control to shock or liquids. • Do not use the remote control in an area with high humidity. • Do not place the remote control in direct sunlight. • Do not place objects, such as furniture, between the remote control and the remote sensor. • The remote control may not work if direct sunlight or bright light shines on the remote sensor. Either move your TV or change the angle at which you use the remote control. Setting up your TV Installing remote control batteries To install the remote control batteries: 1 Remove the battery cover. 2 Insert two AAA batteries into the battery compartment. Make sure that you match the + and - symbols on the batteries with the + and - symbols in the battery compartment. 3 Replace the cover. Notes • Do not mix batteries of different types. • Do not mix old and new batteries. • Remove batteries when the charge is depleted. • Battery chemicals can cause a rash. If the batteries leak, clean the battery compartment with a cloth. If chemicals touch your skin, wash immediately. • If the remote control is not going to be used for an extended period of time, remove the batteries. Universal remote control programming This TV is compatible with several popular universal remote controls. Brand Program code Philips 115 RCA 135 Connecting your TV to a power outlet To connect your TV to a power outlet: • Plug the power cord into a power outlet. Notes • • Make sure that you use the correct type of power. See the label on your TV. If you do not intend to use your TV for an extended period of time, unplug the power cord from the power outlet. Connecting an outside antenna Antenna cables come in two types: 75 ohm and 300 ohm. 75 ohm cable 300 ohm cable • If your antenna cable has a 75 ohm connector, connect the cable to the coaxial jack on the back of your TV. • If your antenna cable has a 300 ohm connector, connect the cable to a 300-75 ohm adapter (not included), connect the adapter to a 75 ohm cable, then connect the other end of the 75 ohm connector to the coaxial jack on the back of your TV. Connecting cable TV Your TV has a 75 ohm jack for connecting cable TV. Some cable TV providers scramble the signals for "premium" (pay) channels. To view these channels, you need a converter/descrambler box. If you do not have a converter/descrambler box, you can connect your cable TV directly to your TV. If you have a converter/descrambler box, you can connect your cable TV using an RF switch (not supplied). For more information about connecting a converter/descramble box, contact your cable TV provider. 4 www.insignia-products.com