Insignia NS-LCD42HD User Manual (English) - Page 8
Connecting your TV to a power outlet, Connecting to an antenna or cable outlet, Connecting - pedestal screws
View all Insignia NS-LCD42HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
4 Remove the pedestal from the top foam packing material, then align it with the six screw holes on the bottom of the TV and secure it with the six screws (provided). TV Secure with six screws Insignia NS-LCD42HD 42" LCD HD 1080p TV • If your antenna cable has a 300 ohm connector, connect the cable to a 300-75 ohm adapter (not included), connect the adapter to a 75 ohm cable, then connect the other end of the 75 ohm connector to the coaxial jack on the back of your TV. Pedestal Connecting your TV to a power outlet To connect your TV to a power outlet: • Plug the power cord into a power outlet. Notes • • Make sure that you use the correct type of power. See the label on your TV. If you do not intend to use your TV for an extended period of time, unplug the power cord from the power outlet. Connecting to an antenna or cable outlet Note We strongly recommend the installation of a high quality roof top antenna, digital cable, or digital satellite set top box be used in conjunction with your TV for best broadcast performance. Antenna cables come in two types: 75 ohm and 300 ohm. 75 ohm cable 75 ohm cable from roof antenna 75 ohm cable from wall outlet Connecting to digital cable or a satellite set top box with an A/B switch You can set up your TV to operate with two antenna inputs by using an A/B switch. Using the configuration in the following illustration, you can view the TV signals from your rooftop antenna by switching to A, or view signals from your set top box by switching to B and tuning your TV to channel 3. 300 ohm cable • If your antenna cable has a 75 ohm connector, connect the cable to the coaxial jack on the back of your TV. RF A/B switch 75 ohm cable from roof antenna Cable or satellite set top box 6 www.insignia-products.com