Insignia NS-LCD47HD-09 User Manual (English) - Page 9

Connecting to an external signal source - 47

Page 9 highlights

Insignia NS-LCD47HD-09 47" LCD HD TV To connect cable TV with a converter/descrambler box: • Use the following illustration to connect a converter/descrambler box. (The RF switch and the signal splitter are not provided.) Set the RF switch to the A position to watch unscrambled channels controlled by your TV remote control. Set the RF switch to the B position to watch scrambled channels controlled by the converter/descrambler controls. RF switch Two-set signal splitter A B Out In TV Cable converter/descrambler box Connecting to an external signal source You can connect a DVD, VCD, VCR, or STB using a variety of methods, including composite cables, component cables, an S-Video cable, or an HDMI cable. The S-Video cable does not carry sound. If you use an S-Video cable, you need to use audio cables to connect the audio output. Warning Make sure that you turn off and unplug your TV before connecting devices. Note For better video, use the S-Video jack if your source has an S-Video connection. For best video, use the HDMI jack if your source has an HDMI connection. To connect an external signal source: 1 For composite video-Plug the audio/video cable into the AUDIO L, AUDIO R, and VIDEO in jacks on the back of your TV. - OR - For S-Video-Plug in the audio cables as described above, then plug one end of an S-Video cable into the S-Video jack on the back of your TV and the other end into the S-Video jack on the external signal source. - OR - For component video-Plug the Y, Pb, and Pr video cables and the Audio L and Audio R cables into the component input jacks. - OR - For HDMI-Plug one end of an HDMI cable into the back of the TV and the other end into the external signal source. 2 Turn on your TV. 3 Press the INPUT button repeatedly to select the external signal source you want to watch. 4 Turn on the external signal source. 5 Insert a disc or videotape into the external signal source, then press the PLAY button. TV HDMI1 PC audio input HDMI2 SPDIF Antenna/cable input Component audio input Component video input S-Video and composite video input 3 Headphone jack HDMI jack S-Video and composite video input Audio input www.insignia-products.com 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

9
Insignia NS-LCD47HD-09 47” LCD HD TV
www.insignia-products.com
To connect cable TV with a
converter/descrambler box:
Use the following illustration to connect a
converter/descrambler box. (The RF switch
and the signal splitter are not provided.)
Set the RF switch to the A position to watch
unscrambled channels controlled by your TV
remote control. Set the RF switch to the B
position to watch scrambled channels
controlled by the converter/descrambler
controls.
Connecting to an external signal source
You can connect a DVD, VCD, VCR, or STB
using a variety of methods, including composite
cables, component cables, an S-Video cable, or
an HDMI cable. The S-Video cable does not
carry sound. If you use an S-Video cable, you
need to use audio cables to connect the audio
output.
To connect an external signal source:
1
For composite video
—Plug the audio/video
cable into the AUDIO L, AUDIO R, and
VIDEO in jacks on the back of your TV.
- OR -
For S-Video
—Plug in the audio cables as
described above, then plug one end of an
S-Video cable into the S-Video jack on the
back of your TV and the other end into the
S-Video jack on the external signal source.
- OR -
For component video
—Plug the Y, Pb, and
Pr video cables and the Audio L and Audio R
cables into the component input jacks.
- OR -
For HDMI
—Plug one end of an HDMI cable
into the back of the TV and the other end into
the external signal source.
2
Turn on your TV.
3
Press the
INPUT
button repeatedly to select
the external signal source you want to watch.
4
Turn on the external signal source.
5
Insert a disc or videotape into the external
signal source, then press the
PLAY
button.
Warning
Make sure that you turn off and unplug your TV
before connecting devices.
Note
For better video, use the S-Video jack if your
source has an S-Video connection. For best video,
use the HDMI jack if your source has an HDMI
connection.
RF switch
Cable converter/descrambler box
Two-set signal splitter
Out
In
A
B
TV
TV
S-Video and
composite
video input
HDMI2
HDMI1
Component
video input
SPDIF
Component
audio input
Antenna/cable
input
PC audio
input
3
HDMI jack
S-Video and
composite
video input
Headphone jack
Audio input