Insignia NS-PDP50 User Manual (Spanish) - Page 11
To connect a DVI device, HDMI IN 1/DVI, AUDIO IN RGB/DVI, INPUT, HDMI1/DVI, To connect a digital
View all Insignia NS-PDP50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Insignia NS-PDP50 50" Plasma TV-720P Connecting a DVI device To connect a DVI device: 1 Connect an HDMI-to-DVI cable to the HDMI IN 1/DVI jack on the back of your TV, then connect the other end of the cable to the DVI out jack on the external device. Connecting a digital audio device Warning Do not look into the DIGITAL AUDIO OUT jack. The jack uses a laser that could damage your eyes. To connect a digital audio device: 1 Connect a digital optical cable to the DIGITAL AUDIO OUT jack on the back of your TV, then connect the other end of the cable to the digital audio in jack on the device. 2 Connect the single-plug end of a two-to-one audio cable to the AUDIO IN (RGB/DVI) jack on the back of your plasma TV, then connect the double-plug end of the cable to the right audio (red) and left audio (white) jacks on the external device. 3 Turn on your plasma TV and the device. 4 Press INPUT one or more times to select HDMI1/DVI. Note If the external device supports the Auto HDMI function, the screen resolution is automatically set to 1280 × 720p. If the external device does not support the Auto HDMI function, you need to set the screen resolution to 1280 × 720p. 2 Turn off your plasma TV's speakers. For more information, see "Turning the speakers on or off" on page 17. www.insignia-products.com 9