Insignia NS-PDP50 User Manual (Spanish) - Page 9
Connecting a standard A/V device, Connecting an S-Video device - plasma tv
View all Insignia NS-PDP50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Insignia NS-PDP50 50" Plasma TV-720P Using a signal amplifier or two-way splitter You may need to install a signal amplifier or a two-way splitter if: • Reception is poor (use a signal amplifier). • Signal from the antenna needs to be split between two TVs (use a two-way splitter). Connecting an S-Video device To connect an S-Video device: 1 Connect an S-Video cable to the S-VIDEO jack on the back or side of your plasma TV, then connect the other end of the cable to the S-Video out jack on the external device. ANTENNA/ CABLE IN Signal amplifier or two-way splitter Connecting a standard A/V device To connect a standard A/V device: 1 Connect the video (yellow), right audio (red), and left audio (white) plugs on a standard A/V cable to the AV1 (back) or AV2 (side) jacks on your plasma TV. Side jacks shown 2 Connect the right audio (red) and left audio (white) plugs on a standard audio cable to the AV IN1 (back) or AV2 (side) jacks on your plasma TV, then connect the plugs on the other end of the cable to the right audio out and left audio out jacks on the external device. 3 Turn on your plasma TV and the device. 4 Press INPUT one or more times to select AV1 or AV2. L AUDIO R VIDEO 2 Connect the plugs on the other end of the cable to the corresponding jacks on the external device. 3 Turn on your plasma TV and the device. 4 Press INPUT one or more times to select AV1 or AV2. www.insignia-products.com 7