Insignia NS-R2001 User Manual (English) - Page 10

NS-R2001_10-1254_MAN_ENG.book Page 8 Friday, February 11, 2011 7:43 AM Insignia NS-R2001 AM/FM Stereo Receiver 2 Press TUNE/PRESET to select the tuning mode. Manual tuning Manual tuning is useful when you already know the frequency of the station you want to listen to. To manually tune a radio station: 1 Repeatedly press BAND on the receiver or TUNER on the remote control to select AM or FM. Note Each time this button is pressed, the mode changes as follows: • TUNING mode-PRESET turns off. • PRESET mode-PRESET lights up. When PRESET is not lit up on the display the tuner will scan through each individual channel. If it is lit up it will scan through only channels saved into the OR preset memory. 3 Rotate the UP/DOWN knob quickly (over several steps once) or press hold the TUNE / buttons for more than 0.5 seconds. OR Band Frequency 2 Press TUNE/PRESET to select the tuning mode. The tuner searches until a station of sufficient strength has been found. The display shows the tuned frequency and TUNE. If the station found is not the station you want to listen to, repeat this procedure. Weak stations are skipped during auto tuning. Note Each time this button is pressed, the mode changes as follows: • TUNING mode-PRESET turns off. • PRESET mode-PRESET lights up. 3 Rotate the UP/DOWN knob one by one slowly or press the TUNE / buttons repeatedly until the right frequency has been reached. OR 8 www.insigniaproducts.com