Insignia NS-R2001 User Manual (English) - Page 6

NS-R2001_10-1254_MAN_ENG.book Page 4 Friday, February 11, 2011 7:43 AM Insignia NS-R2001 AM/FM Stereo Receiver To connect the antennas: 1 Connect the FM antenna to your receiver. Note If you are using an indoor FM antenna, change the position of the antenna until you get the best reception of your favorite FM stations. To improve reception, you may use a 75 Ω outdoor antenna instead of an indoor antenna. Disconnect the indoor antenna before replacing it with an outdoor antenna. 2 Connect the AM loop antenna to the receiver. Note Place the AM loop antenna as far as possible from the receiver, television, speaker cords, and the AC cord. Change the position of the antenna until you get the best reception of your favorite AM stations. To improve reception, you may use an outdoor AM antenna instead of a loop AM antenna. Disconnect the indoor antenna before replacing it with an outdoor antenna. Connecting audio components CD player Tape deck PLAY (LINE) OUT REC (LINE) IN Connecting a turntable REC IN VCR/DVR recorder PLAY OUT Turntable with MM-type cartridge Note To connect a turntable with an MC type cartridge, use a separate head amplifier or step-up transformer. Connecting speakers Speaker A Right Left Right Left Speaker B Caution Use speakers with an impedance of 8 Ω or more if using only the SPEAKER A or SPEAKER B terminals. Use speakers with an impedance over 16 Ω or more if using both the SPEAKER A or SPEAKER B terminals. Do not let the bare speaker wires touch each other or any metal part of this receiver. Doing so may damage the receiver or speaker. To connect your speakers: • Connect your speaker cables to the receiver. Notes If you have only one pair of speakers, connect them to the SPEAKER A terminals. Be sure to connect the speakers firmly and correctly according to the channel (left and right) and the polarity (+ and -). If you do not make the connections correctly, you will not hear any sounds from the speakers. If the sound is unnatural and lacks bass, the speaker polarity is incorrect. Connecting headphones 4 www.insigniaproducts.com