Insignia NS-SB216 User Guide - Page 8
Using the remote control, Setting up your soundbar - soundbar no sound
View all Insignia NS-SB216 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
NS-SB216 Using the remote control 1 Remove the plastic tab from the battery compartment before using the remote control for the first time. 2 Point the remote control directly at the IR sensor on the front of the soundbar. You must be within approximately 23 ft. (7 m) of the soundbar. IR sensor Cautions • Do not spill water or any liquid on the remote control. • Do not place the remote control on a wet surface. • Do not place the remote control in direct sunlight or near sources of excessive heat. • If the remote control is not going to be used for a long time, remove the battery to avoid any damage that may be caused by leakage and corrosion. Setting up your soundbar First step - Choosing your connection • Look at the back of your sound source device, such as a TV, DVD/Blu-ray player, or cable box, to identify your audio output ports. Choose one connection option below that fits your audio source. You can connect several devices and switch the sound source as required. Caution Turn off all devices while you are making connections. Audio Quality Best Good Good Jack Type (on source device) Cable Digital Optical cable (not included). See "Digital Optical connection (best)" on page 9. RCA audio cable (included). See "RCA connection (good)" on page 10. 3.5 mm audio cable (adapter included). See "3.5mm connection (good)" on page 10. 8 www.insigniaproducts.com