Insignia NS-TDRE67W1 User guide - Page 31
Reversing the dryer door, Install the locker onto the right side of the dryer with the screws
View all Insignia NS-TDRE67W1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
INSTALLATION INSTRUCTIONS 12-Cycle Electric and Gas Dryers Reversing the dryer door 1 Make sure that the power cord is unplugged. 2 While supporting the door, remove the four hinge screws from the door, then lift the door to remove it and set the door aside. Remove two screws Remove two screws CAUTION: Be careful not to drop the door when removing the screws. 3 Remove the screws for the locker cover on the right side of the dryer and the screws for the locker cover on the left side of the dryer. 4 Install the locker onto the right side of the dryer with the screws you just removed, then install the locker cover on the left side of the dryer. Remove the locker screws Remove the locker cover screws www.insigniaproducts.com 31
31
www.insigniaproducts.com
12-Cycle Electric and Gas Dryers
INSTALLATION INSTRUCTIONS
Reversing the dryer door
1
Make sure that the power cord is unplugged.
2
While supporting the door, remove the four hinge screws from the
door, then lift the door to remove it and set the door aside.
3
Remove the screws for the locker cover on the right side of the
dryer and the screws for the locker cover on the left side of the
dryer.
4
Install the locker onto the right side of the dryer with the screws you
just removed, then install the locker cover on the left side of the
dryer.
CAUTION:
Be careful not to drop the door when removing the screws.
Remove two screws
Remove two screws
Remove the
locker cover
screws
Remove the
locker screws