Insignia NS-TDRE67W1 User guide - Page 35
Unloading your dryer, Cleaning the lint filter
![]() |
View all Insignia NS-TDRE67W1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
OPERATING INSTRUCTIONS 12-Cycle Electric and Gas Dryers Step 4: Start your dryer 1 Press the (start/pause) button. The Drying indicator illuminates. 2 If you need to pause the cycle (for example to add or remove items or adjust the load), press the (start/pause) button, then open the door. Your dryer stops tumbling. When you are ready to start drying again, close the door, then press the (start/pause) button. Unloading your dryer 1 When the drying cycle is over, your dryer beeps six times and then turns off. 2 Open the door and remove the items. Note: You should clean the lint filter after every load to avoid lint buildup and to make sure that your dryer is running efficiently. See Cleaning the lint filter on page 35. Cleaning the lint filter CAUTION: • Do not operate your dryer without the lint filter in place. • Do not use a damaged or broken lint filter. This may reduce performance or cause a fire. Note: • You should clean the lint filter before every load to shorten the drying time and to make sure that your dryer is running efficiently. • If the lint is difficult to wipe away, you can gently wash the filter in mild, soapy water. Make sure that you rinse all the soap off the filter and that the filter is dry before you put it back into your dryer. • Gently pull the lint filter out of the slot at the bottom of the drum. Remove the accumulated lint, then insert the filter back into the slot. Lint filter www.insigniaproducts.com 35
![](/manual_guide/products/insignia-nstdre67w1-user-guide-0ce0f8d/35.png)