Intel BLKD865PERL Product Specification - Page 40
Gigabit LAN Subsystem
View all Intel BLKD865PERL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Intel Desktop Board D865PERL Technical Product Specification Table 7 describes the LED states when the board is powered up and the 10/100 Mbits/sec LAN subsystem is operating. Table 7. LAN Connector LED States LED Color Green Yellow LED State Off On Off On (steady state) On (brighter and pulsing) Condition 10 Mbits/sec data rate is selected. 100 Mbits/sec data rate is selected. LAN link is not established. LAN link is established. The computer is communicating with another computer on the LAN. 1.11.2 Gigabit LAN Subsystem The Gigabit (10/100/1000 Mbits/sec) LAN subsystem includes the MCH (with its CSA interface), the Intel 82547EI PLC, and an RJ-45 LAN connector with integrated status LEDs. 1.11.2.1 Intel® 82547EI Platform LAN Connect Device Intel 82547EI provides the following functions: • Basic 10/100/1000 Ethernet LAN connectivity • Communication Streaming Architecture (CSA) port provides higher throughput and lower latencies than the Intel 82562EZ device, resulting in up to 30% higher bus throughput (up to wirespeed) • Full device driver compatibility • Programmable transit threshold • Configuration EEPROM that contains the MAC address 1.11.2.2 RJ-45 LAN Connector with Integrated LEDs Two LEDs are built into the RJ-45 LAN connector (as shown in Figure 15). Table 8 describes the LED states when the board is powered up and the 10/100/1000 Mbits/sec LAN subsystem is operating. Green LED Green/Orange LED OM15977 Figure 15. LAN Connector LED Locations 40