Intel BLKD865PERL Product Specification - Page 79
Power Supply Considerations
![]() |
View all Intel BLKD865PERL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Technical Reference 2.11.4 Power Supply Considerations CAUTION The +5 V standby line for the power supply must be capable of providing adequate +5 V standby current. Failure to do so can damage the power supply. The total amount of standby current required depends on the wake devices supported and manufacturing options. System integrators should refer to the power usage values listed in Table 43 when selecting a power supply for use with the Desktop Board D865PERL. Additional power required will depend on configurations chosen by the integrator. The power supply must comply with the following recommendations found in the indicated sections of the ATX form factor specification. • The potential relation between 3.3 VDC and +5 VDC power rails (Section 4.2) • The current capability of the +5 VSB line (Section 4.2.1.2) • All timing parameters (Section 4.2.1.3) • All voltage tolerances (Section 4.2.2) For information about The ATX form factor specification Refer to Section 1.4, page 17 79
![](/manual_guide/products/intel-boxd865perl-product-specification-6919b90/79.png)