Intel BLKDP55WG Product Specification - Page 45
Add-in Card Connectors
![]() |
UPC - 735858206044
View all Intel BLKDP55WG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Technical Reference 2.2.2.2 Add-in Card Connectors The board has the following add-in card connectors: • PCI Express 2.0 x16: one PCI Express 2.0 x16 connector supporting simultaneous transfer speeds up to 8 GB/s of peak bandwidth per direction and up to 16 GB/s concurrent bandwidth. • PCI Express 2.0 x8: one PCI Express 2.0 x 8 connector supporting simultaneous transfer speeds up to 4 GB/s of peak bandwidth per direction and up to 8 GB/s concurrent bandwidth. • PCI Express 2.0 x4: one PCI Express 2.0 x4 connector (implemented using a x4 physical connector capable of accepting a x16 card). The x4 interface supports simultaneous transfer speeds up to 500 MB/s of peak bandwidth per direction and up to 4 GB/s concurrent bandwidth. • PCI Express 2.0 x1: two PCI Express 2.0 x1 connectors. The x1 interface supports simultaneous transfer speeds up to 1 GB/s of peak bandwidth per direction and up to 2 GB/s concurrent bandwidth. • PCI Conventional (rev 2.3 compliant) bus: two PCI Conventional bus add-in card connectors. Note the following considerations for the PCI Conventional bus connector: • The PCI Conventional bus connectors are bus master capable. • SMBus signals are routed to the PCI Conventional bus connectors. This enables PCI Conventional bus add-in boards with SMBus support to access sensor data on the desktop board. The specific SMBus signals are as follows: ⎯ The SMBus clock line is connected to pin A40. ⎯ The SMBus data line is connected to pin A41. 45
![](/manual_guide/products/intel-blkdp55wg-product-specification-c5b6eb4/45.png)