Intel D2550MUD2 Technical product specification - Page 18
System Memory - chipset
View all Intel D2550MUD2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Intel Desktop Board D2550MUD2 Technical Product Specification 1.4 System Memory The board has two 204-pin DDR3 SO-DIMM sockets and supports the following memory features: • DDR3 SDRAM SO-DIMMs with gold-plated contacts • Unbuffered, single-sided or double-sided DIMMs • 4 GB maximum total system memory • Minimum total system memory: 256 MB • Non-ECC DIMMs • Serial Presence Detect • DDR3 1066 MHz, DDR3 1333 MHz, DDR3 1600 MHz SO-DIMMs (DDR3 1333 MHz and DDR3 1600 MHz memory will run at 1066 MHz) NOTES • Due to passively-cooled thermal constraints, system memory must have an operating temperature rating of 85 oC. The board is designed to be passively cooled in a properly ventilated chassis. Chassis venting locations are recommended above the system memory area for maximum heat dissipation effectiveness. • If you are installing only one SO-DIMM, it must be installed in the bottom socket (SO-DIMM 1). • To be fully compliant with all applicable DDR3 SDRAM memory specifications, the board should be populated with SO-DIMMs that support the Serial Presence Detect (SPD) data structure. This allows the BIOS to read the SPD data and program the chipset to accurately configure memory settings for optimum performance. If nonSPD memory is installed, performance and reliability may be impacted or the SODIMMs may not function under the determined frequency. Table 3 lists the supported SO-DIMM configurations. Table 3. Supported Memory Configurations1 Raw Card Version SO-DIMM Capacity DRAM Device DRAM Technology Organization # of DRAM Devices 1 GB B 2 GB 1 Gb 2 Gb 128 M x 8 8 256 M x 8 8 2 GB F 4 GB2 1 Gb 2 Gb 128 M x 8 16 256 M x 8 16 Notes: 1. System memory configurations are based on availability and are subject to change. 2. Support for one 4 GB SO-DIMM installed in slot 1. Slot 0 must be left empty. 18