Intel D845EPI Intel Desktop Board D845EPI Technical Product Specification - Page 56
Mechanical Considerations
View all Intel D845EPI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Intel Desktop Board D845EPI Technical Product Specification 2.10 Mechanical Considerations The Desktop Board D845EPI is designed to fit into either a microATX or an ATX-form-factor chassis. Figure 11 illustrates the mechanical form factor for the Desktop Board. Dimensions are given in inches [millimeters]. The outer dimensions are 9.20 inches by 8.20 inches [233.68 millimeters by 208.28 millimeters]. Location of the I/O connectors and mounting holes are in compliance with the ATX specification. # INTEGRATOR'S NOTE When installing the Desktop Board in a microATX chassis, make sure that peripheral devices are installed at least 1.5 inches above the main power connector, the diskette drive connector, the IDE connector, and the DIMM sockets. 6.50 [165.10] 6.10 [154.94] .800 [20.32] 5.20 [132.08] 0.00 1.700 [42.5] .150 [3.81] 0.00 2.600 [66.04] Figure 11. Desktop Board Dimensions 9.050 [229.87] 8.800 [223.52] OM16250 56