Intel D845PT Intel Desktop Board D845PT/D845BG Product Guide - Page 22
Wake from USB, Wake from PS/2 Keyboard/Mouse, PME# Wakeup Support
View all Intel D845PT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Intel Desktop Boards D845PT and D845BG Product Guide Table 4. Standby Current Requirements Instantly Available Current Support Estimate for integrated board components Estimate for add-on components (Add to integrated board components shown above) Description Total for the D845PT or D845BG board PS/2 ports** PCI 2.2 slots (wake-enabled) PCI 2.2 slots (non-wake-enabled) CNR** (wake enabled) CNR** (non-wake-enabled) USB ports** Standby Current Requirements (mA) 770* 345 375 100 875 40 700 * Refer to the Intel Desktop Board D845PT/D845BG Technical Product Specification for the exact standby current requirements ** Dependent upon system configuration ✏ NOTE PCI requirements are calculated by totaling the following: • One wake-enabled device @ 375 mA. • Five non-wake-enabled devices @ 20 mA each. PS/2 Ports requirements per the IBM PS/2 Port Specification (Sept 1991): • Keyboard @ 275 mA. • Mouse @ 70 mA. USB requirements are calculated by totaling the following: • One wake-enabled device @ 500 mA. • USB hub @ 100 mA. • Three USB non-wake-enabled devices @ 2.5 mA each. • The USB ports are limited to a combined total of 700 mA. Wake from USB USB bus activity wakes the computer from an ACPI S1 or S3 state. ✏ NOTE Wake from USB requires the use of a USB peripheral that supports Wake from USB. Wake from PS/2 Keyboard/Mouse PS/2 keyboard/mouse activity wakes the computer from an ACPI S1 or S3 state. PME# Wakeup Support When the PME# signal on the PCI bus is asserted, the computer wakes from an ACPI S1, S3, or S5 state. 22