Intel D845PT Intel Desktop Board D845PT/D845BG Product Guide - Page 58
Diskette Configuration Submenu, Table 16., Primary/Secondary IDE Master/Slave Submenus
View all Intel D845PT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Intel Desktop Boards D845PT and D845BG Product Guide Table 16. Primary/Secondary IDE Master/Slave Submenus (continued) Feature Ultra DMA Cable Detected (Note) Options • Disabled (default) • Mode 0 • Mode 1 • Mode 2 • Mode 3 • Mode 4 • Mode 5 None Description Specifies the Ultra DMA mode for the drive. Displays the type of cable connected to the IDE interface: 40-conductor or 80-conductor (for ATA-66/100 devices). Note: These configuration options appear only if an IDE device is installed. Diskette Configuration Submenu Maintenance Main Advanced Security Power PCI Configuration Boot Configuration Peripheral Configuration IDE Configuration Diskette Configuration Event Log Configuration Video Configuration This submenu shown in Table 17 is used to configure the diskette drive. Boot Exit Table 17. Diskette Configuration Submenu Feature Options Diskette Controller Floppy A Diskette Write-Protect • Disabled • Enabled (default) • Not Installed • 360 KB 5¼" • 1.2 MB 5¼" • 720 KB 3½" • 1.44/1.25 MB 3½" (default) • 2.88 MB 3½" • Disabled (default) • Enabled Description Disables or enables the integrated diskette controller. Specifies the capacity and physical size of diskette drive A. Disables or enables write-protect for the diskette drive. 58