Intel D845PT Intel Desktop Board D845PT/D845BG Product Guide - Page 38

Setting the BIOS Configuration Jumper Block, Table 5.

Get Intel D845PT PDF manuals and user guides View all Intel D845PT manuals
Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

Intel Desktop Boards D845PT and D845BG Product Guide Setting the BIOS Configuration Jumper Block CAUTION Always turn off the power and unplug the power cord from the computer before changing the jumper. Moving the jumper with the power on may result in unreliable computer operation. The location of the board's BIOS configuration jumper is shown in Figure 18. 31 J6F2 OM12634 Figure 18. Location of the BIOS Configuration Jumper Block The three-pin BIOS jumper block enables all board configurations to be done in BIOS Setup. Table 5 shows the jumper settings for the Setup program modes. Table 5. Jumper Settings for the BIOS Setup Program Modes (J6F2) Function / Mode Normal Jumper Setting 1-2 3 1 Configuration The BIOS uses current configuration information and passwords for booting. Configure 2-3 3 1 After the POST runs, the BIOS displays the maintenance menu. Use this menu to clear passwords. Recovery None 3 1 The BIOS attempts to recover the BIOS configuration. A recovery diskette is required. 38

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
Intel Desktop Boards D845PT and D845BG Product Guide
38
Setting the BIOS Configuration Jumper Block
CAUTION
Always turn off the power and unplug the power cord from the computer before changing the
jumper.
Moving the jumper with the power on may result in unreliable computer operation.
The location of the board
’
s BIOS configuration jumper is shown in Figure 18.
OM12634
3
1
J6F2
Figure 18.
Location of the BIOS Configuration Jumper Block
The three-pin BIOS jumper block enables all board configurations to be done in BIOS Setup.
Table 5 shows the jumper settings for the Setup program modes.
Table 5.
Jumper Settings for the BIOS Setup Program Modes (J6F2)
Function / Mode
Jumper Setting
Configuration
Normal
1-2
1
3
The BIOS uses current configuration information and passwords
for booting.
Configure
2-3
1
3
After the POST runs, the BIOS displays the maintenance menu.
Use this menu to clear passwords.
Recovery
None
1
3
The BIOS attempts to recover the BIOS configuration.
A
recovery diskette is required.