Intel D845PT Intel Desktop Board D845PT/D845BG Product Guide - Page 37
Connecting the IDE Cable
View all Intel D845PT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Installing and Replacing Desktop Board Components Connecting the IDE Cable The Intel® boxed desktop board package include an IDE cable. The cable connects two drives to the desktop board. The cable supports the Ultra DMA-33 and ATA-66/100 transfer protocols. Figure 17 shows the correct installation of the cable. ✏ NOTE ATA-66/100 compatible cables are backward compatible with drives using slower IDE transfer protocols. If an ATA-66/100 disk drive and a disk drive using any other IDE transfer protocol are attached to the same cable, the maximum transfer rate between the drives may be reduced to that of the slowest drive. ✏ NOTE Do not connect an ATA device as a slave on the same IDE cable as an ATAPI master device. For example, do not connect an ATA hard drive as a slave to an ATAPI CD-ROM drive. For correct function of the cable: • Attach the cable end with the single connector to the board. • Attach the cable end with the two closely spaced connectors to the drives. B A Figure 17. Connecting the IDE Cable OM12633 37