Home » Intel Manuals » Desktops » Intel ISP4400 » Manual Viewer

Intel ISP4400 Quick Start Guide - Page 22

FR/RL Bracket Attached to the Rear Left Side of the Rack

Add to My Manuals
Save this manual to your list of manuals

Page 22 highlights

9. Place one of the brackets labeled FR/RL on the rear left side of the rack as shown in Figure 14. 10. Make sure that the holes in the bracket are aligned with the holes in the rack, and that the top of the bracket is aligned with the top of the front left bracket already attached to the rack. A OM09995 Figure 14. FR/RL Bracket Attached to the Rear Left Side of the Rack 11. The two screws are noted by "A" in Figure 14. Secure the bracket to the rack with two screws. 12. Place the remaining bracket labeled FL/RR on the back left side of the rack. 13. Make sure that the holes in the bracket are aligned with the holes in the rack, and that the top of the bracket is aligned with the top of the front right bracket already attached to the rack. 14. Secure the bracket to the rack with two screws. 15. Loosen the screws for the brackets so that each one can move left and right freely. 22 Quick Start Guide

Section	Page
SRKA4/ISP4400 Server System Quick Start Guide	1
Disclaimer	2
Contents	3
Warnings and Cautions	6
Safety and Regulatory Requirements	7
Unpack and Inspect the Server	7
Select Site	8
Space Requirements	8
General Site Criteria	9
Mounting the SRKA4 Server System in a Rack	9
Equipment Rack Precautions	10
Slide Rail Kit	11
Prepare the Slide Assemblies	13
Prepare the Server	13
Attach EIA Rail Brackets	14
Attach the Slide Assembly to the Rack	18
Place the Chassis in the Rack	18
Install Handles	19
Attach the Front Bezel to the Chassis	19
Removing the Server from the Rack	19
Center-mount Kit	20
Attach EIA Rail Brackets to the Rack	21
Secure the Chassis to the EIA Brackets	23
Attach the Front Bezel to the Chassis	24
Removing the Server from the Rack	24
Check Power Cord	24
Power Cord Requirements	24
Connect Monitor, Keyboard, Mouse	25
Rear Panel I/O Ports and Features	25
Chassis Front Controls and Indicators	26
Turn on Video Monitor and Server	27
Run Power-On Self Test	27
Changing the BIOS Setup	28
Booting from CD	29
Changing the Boot Device Priority Temporarily	30
Changing the Boot Device Priority Permanently	31
Running the SCSISelect Utility	31
When to Run the SCSISelect Utility	31
Running the SCSISelect Utility	32
Configuring the Adaptec AIC-7880 SCSI Adapter	32
Configuring the Adaptec AIC-7899 SCSI Adapter	33
Country Kit Contents	33
Server Software Kit	33
Quick Start Guide	35
Chassis Labels	35
Hardware	35
Service Partition (Optional)	36
Product Guides	36
Using the Acrobat .PDF Files	36

Match case Limit results 1 per page

Quick Start Guide

Place one of the brackets labeled FR/RL on the rear left side of the rack as shown in Figure 14.

10.

Make sure that the holes in the bracket are aligned with the holes in the rack, and that the top

of the bracket is aligned with the top of the front left bracket already attached to the rack.

OM09995

Figure 14.

FR/RL Bracket Attached to the Rear Left Side of the Rack

11.

The two screws are noted by “A” in Figure 14.

Secure the bracket to the rack with two screws.

12.

Place the remaining bracket labeled FL/RR on the back left side of the rack.

13.

Make sure that the holes in the bracket are aligned with the holes in the rack, and that the top

of the bracket is aligned with the top of the front right bracket already attached to the rack.

14.

Secure the bracket to the rack with two screws.

15.

Loosen the screws for the brackets so that each one can move left and right freely.