Intel R2000LH2/LT2 Service Guide - Page 21
Peripheral Devices
View all Intel R2000LH2/LT2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Server System Features Peripheral Devices The Intel® Server System R2000LH2/LT2 provides locations and hardware for installing hard drives, CD-ROM drive, or DVD-ROM drive. The following figure shows the available options: A Asset Tag B Slimline Optical Drive Bay C Video Port D USB Ports E Front Control Panel F Hard Disk Drive Bays Figure 9. Optional Peripherals (4x3.5-inch hard drive bays as shown) Hard Disk Drive Carriers The Intel® Server System R2000LH2/LT2 ships with either 3.5" or 2.5" hard disk drive carrier, and with different maximum number of hard disk drives; see the table below for details: Table 6. Hard Disk Drive Options Intel® Server System R2304LH2/LT2 Supported Hard Drive Type 3.5" or 2.5" Maximum Hard Drive Number 4 R2208LH2/LT2 2.5" 8 Note: SAS drives are only supported when proper Intel® RAID C600 Upgrade Key or Intel® Integrated RAID Module is installed. For instructions on installing hard drives, see Installing and Removing Hard Drive. Note: Drives can consume up to 17 watts of power each. Drives must be specified to run at a maximum ambient temperature of 45°C. Note: The Intel® Server System R2000LH2/LT2 does not support all SAS or Serial ATA (SATA) hard drives. For a web link to a list of supported hard drives, see Additional Information and Software. Intel® Server System R2000LH2/LT2 Service Guide 9