Intel S3000PT Product Specification - Page 78
Jumper Blocks
UPC - 735858189965
View all Intel S3000PT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Intel® Server Board S3000PT TPS Connectors and Jumper Blocks J2H1 4pin Aux fan connector FOXCONN ELECTRONICS, INC. HF2704E-M1 MOLEX CONNECTOR CORPORATION 47053-1000 TYCO ELECTRONICS CORPORATION 1470947-1 WIESON TECHNOLOGIES CO., LTD 2366C888-007 WIESON TECHNOLOGIES CO., LTD 2366C888-007G1 WIESON TECHNOLOGIES CO., LTD G2366C888-007H Table 57. Non-Standard Connector Information 7.6.3 POST Code LEDs Four POST code LEDs display POST code progression activities using hexadecimal format, read from the least significant bit to the most significant bit . These LEDs are not visible from the rear I/O panel. 7.7 Jumper Blocks This section describes configuration jumper options on the Intel® Server Board S3000PT. 7.7.1.1 Clear CMOS and NIC1 Firmware Update and system maintenance mode Jumpers Both the CMOS Clear and the NIC1 firmware update jumper consist of 3-pin headers (CMOS Clear = J1B1, NIC1 FW update = J1B2 ) located just behind the DIMM slots and near the board edge. The Intel® Server Board S3000PT provides two 3-pin jumper blocks that are used to perform clearing of NVRAM and enabling of NIC1 firmware update options. The factory defaults are set to Normal mode for each function. The following tables describe each jumper option. Table 58. CMOS Clear Jumper Options (J1B1) 70 Revision 1.3