Intel S3210SHLX Product Specification - Page 114

Intel® Server Boards S3200SH/S3210SH TPS Design and Environmental Specifications Duration Continuous 0 to ½ AC cycle Table 72. AC Line Surge Transient Performance Surge 10% 30% AC Line Surge Operating AC Voltage Nominal AC Voltages Line Frequency 50/60Hz Mid-point of nominal AC Voltages 50/60Hz Performance Criteria No loss of function or performance. No loss of function or performance. 8.2.4 AC Line Fast Transient (EFT) Specification The power supply shall meet the EN61000-4-5 directive and any additional requirements in IEC1000-4-5:1995 and the Level 3 requirements for surge-withstand capability, with the following conditions and exceptions: • These input transients must not cause any out-of-regulation conditions, such as overshoot and undershoot, nor must it cause any nuisance trips for any of the power supply protection circuits. • The surge-withstand test must not produce damage to the power supply. • The supply must meet surge-withstand test conditions under maximum and minimum DC-output load conditions. 8.3 Product Regulatory Compliance Intended Application - This product was evaluated as Information Technology Equipment (ITE), which may be installed in offices, schools, computer rooms, and similar commercial type locations. The suitability of this product for other product categories and environments (such as: medical, industrial, telecommunications, NEBS, residential, alarm systems, test equipment, etc.), other than an ITE application, may require further evaluation. This is an FCC Class A device. Integration of it into a Class B chassis does not result in a Class B device. 8.3.1 Product Safety Compliance The server board complies with the following safety requirements: • UL60950 - CSA 60950(USA / Canada) • EN60950 (Europe) • IEC60950 (International) • CB Certificate and Report, IEC60950 (report to include all country national deviations) • CE - Low Voltage Directive 73/23/EEE (Europe) 100 Revision 1.3