Intel S3210SHLX Product Specification - Page 20

Server Board Overview Intel® Server Boards S3200SH/S3210SH TPS − One 4-pin SATA RAID Key − One 2-pin intrusion detection • BIOS − EFI BIOS • Power Management − Support for Power Management of all capable components − ACPI compliant motherboard and BIOS − Sleep Switch and dual mode LED indicator • Manufacturing − Surface mount technology. Single sided assembly for LC/V board SKUs and double sided assembly for the LX board SKU − 6 layer PCB • Form Factor − ATX 2.0, 12'' x 9.6'', 1U thermally optimized, and SSI TEB Rev 2.11 compatible. • Universal Serial Bus 2.0 (USB) − Two external USB ports (located at the rear panel) with an additional internal header providing two optional USB ports for front panel support − Supports wake-up from sleeping states S1 and S4 (S3 is not supported) − Supports legacy keyboard/mouse connections when using a PS2-USB dongle • LPC (Low Pin Count) bus segment with one embedded device − Super I/O controller (SMSC* SCH5027D) providing all PC-compatible I/O (floppy, serial, keyboard, mouse, two serial com ports) and integrated hardware monitoring. • SSI-compliant connectors for SSI interface support • Standard 24-pin SSI front panel, 2x12 main power connector, and 2x4 CPU power connector • Fan Support − 5 general purpose 4-pin fan headers ƒ One 4-pin processor fan header (active heat sink required) ƒ Four 4-pin system fan headers: SYS FAN1, SYS FAN2 and SYS FAN3 for Intel high density applications to support Intel® Server System SR1530SH; SYS FAN4 is for use in the Intel® Entry Server Chassis SC5299-E • Diagnostic LEDs to display POST code indicators during boot • Onboard SATA RAID − Intel® Matrix Storage Technology supports software SATA RAID 0, 1, 10 and 5; Microsoft Windows* driver support only. The following figure shows the board layout of the LX board SKU. Each connector and major component is identified by letter (shown in Table 1). 6 Revision 1.3