Intel S5000VCL User Guide - Page 36

Installing FBDIMMs To install FBDIMMs, follow these steps: 1. Observe the safety and ESD precautions in "Safety Information". 2. Turn off all peripheral devices connected to the server. Turn off the server. 3. Disconnect the AC power cord from the server. 4. Remove the server's cover. See the documentation that came with your server chassis for instructions on removing the server's cover. 5. Locate the DIMM sockets (see Figure 8). DIMM A3 Socket DIMM A2 Socket DIMM A1 Socket (blue) DIMM B1 Socket (blue) DIMM B2 Socket DIMM B3 Socket D A C B Figure 8. Installing DIMMS AF000648 6. Make sure the clips at either end of the DIMM socket(s) are pushed outward to the open position. 7. Holding the DIMM by the edges, remove it from its anti-static package. 8. Position the DIMM above the socket. Align the notch on the bottom edge of the DIMM with the key in the DIMM socket. The arrow in the inset in Figure 8 is pointing to the key in the socket. 9. Insert the bottom edge of the DIMM into the socket. 18 Intel® Server Board S5000VCL User Guide