Intel SC5275-E User Guide - Page 49

Replacing Fans, Replacing a Front System Fan, Standard Hard Drive Bay Cage

Get Intel SC5275-E - Entry Server Chassis PDF manuals and user guides
UPC - 735858171168
View all Intel SC5275-E manuals
Add to My Manuals
Save this manual to your list of manuals

Page 49 highlights

3 Maintaining Your Server Replacing Fans The chassis contains two replaceable system fans. The power supply fan(s) are not replaceable. Your replacement fan should be the same size and type as the fan you are removing. Replacing a Front System Fan Standard Hard Drive Bay Cage The front system fan is located inside the hard drive bay cage. To replace it, the cage must be removed. It is not necessary to remove the hard drives from the cage. 1. Remove the left access cover. 2. Remove the bezel. 3. Disconnect the fan cable from the server board. 4. Disconnect the cables from all hard drives. 5. Remove the two screws at the front of the hard drive bay cage and the two screws at the side of the cage. 6. Slide the cage from the chassis. It may be necessary to push the cage out from the back. 7. Use a flat-head screwdriver to pry up the four nylon rivets that hold the fan in place. 8. Slide the fan out through the fan opening. TP00078 Figure 17. Replacing the Front System Fan in a Standard Drive Cage Intel® Entry Server Chassis SC5275-E User Guide 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
3
Maintaining Your Server
Intel® Entry Server Chassis SC5275-E User Guide
31
Replacing Fans
The chassis contains two replaceable system fans.
The power supply fan(s) are not replaceable.
Your replacement fan should be the same size and type as the fan you are removing.
Replacing a Front System Fan
Standard Hard Drive Bay Cage
The front system fan is located inside the hard drive bay cage.
To replace it, the cage must be
removed.
It is not necessary to remove the hard drives from the cage.
1.
Remove the left access cover.
2. Remove the bezel.
3.
Disconnect the fan cable from the server board.
4.
Disconnect the cables from all hard drives.
5.
Remove the two screws at the front of the hard drive bay cage and the two screws at the side of
the cage.
6.
Slide the cage from the chassis.
It may be necessary to push the cage out from the back.
7.
Use a flat-head screwdriver to pry up the four nylon rivets that hold the fan in place.
8.
Slide the fan out through the fan opening.
TP00078
Figure 17.
Replacing the Front System Fan in a Standard Drive Cage