Intel SE7500WV2 Product Guide - Page 56
Installing a Redundant Fan, Removing the Fan module
UPC - 735858157049
View all Intel SE7500WV2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Installing a Redundant Fan 1. Before removing the cover to work inside the system, observe the safety guidelines on page 45. 2. Remove the cover from the chassis. 3. Remove the full-height PCI riser card. 4. Remove the flex circuit cable retention clip. 5. Disconnect the flex circuit cable from the backplane. 6. At the end of the fan module closest to the chassis centerline, push on the tab to release it from the chassis (A). 7. While pushing on the tab, lift up on the module to clear the retention stub. 8. Slide the module towards the power supply until it comes free. 9. Lift the fan module out of the chassis. 3 2 1 C B A Figure 37. Removing the Fan module 10. Remove the fan blank from the fan module. A OM14088 B Figure 38. Removing the Fan Blank OM14587 56 Intel SR2300 Chassis Subassembly Product Guide