Intel SE7520AF2 User Guide - Page 23

Installing DIMMs,

Get Intel SE7520AF2 PDF manuals and user guides View all Intel SE7520AF2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

Hardware Installations and Upgrades Installing DIMMs To install DIMMs, follow these steps: 1. Observe the safety and ESD precautions at the beginning of this book. 2. Turn off all peripheral devices connected to the server. Turn off the server. 3. Disconnect the AC power cord from the server. 4. Remove the server cover and locate the DIMM sockets (see Figure 8). C D A B Figure 8. Installing Memory TP00811 5. Make sure the clips at each end of the DIMM socket(s) are pushed outward to the open position. 6. Holding the DIMM by the edges, remove it from its anti-static package. 7. Position the DIMM above the socket. Align the small notch in the bottom edge of the DIMM with the key in the socket (see inset in Figure 8). 8. Insert the bottom edge of the DIMM into the socket. 9. When the DIMM is inserted, push straight down on the top edge of the DIMM until the retaining clips snap into place. Make sure the clips are firmly in place. 10. Replace the server's cover and reconnect the AC power cord. 12 Intel® Server Board SE7520AF2 User Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
Hardware Installations and Upgrades
12
Intel® Server Board SE7520AF2 User Guide
Installing DIMMs
To install DIMMs, follow these steps:
1.
Observe the safety and ESD precautions at the beginning of this book.
2.
Turn off all peripheral devices connected to the server. Turn off the server.
3.
Disconnect the AC power cord from the server.
4.
Remove the server cover and locate the DIMM sockets (see Figure 8).
Figure 8.
Installing Memory
5.
Make sure the clips at each end of the DIMM socket(s) are pushed outward to the open
position.
6.
Holding the DIMM by the edges, remove it from its anti-static package.
7.
Position the DIMM above the socket. Align the small notch in the bottom edge of the DIMM
with the key in the socket (see inset in Figure 8).
8.
Insert the bottom edge of the DIMM into the socket.
9.
When the DIMM is inserted, push straight down on the top edge of the DIMM until the
retaining clips snap into place. Make sure the clips are firmly in place.
10.
Replace the server’s cover and reconnect the AC power cord.
TP00811
A
B
C
D