Intel SE7520AF2 User Guide - Page 24

Removing DIMMs, Installing or Replacing the Processor - supported processors

Get Intel SE7520AF2 PDF manuals and user guides View all Intel SE7520AF2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 24 highlights

Hardware Installations and Upgrades Removing DIMMs To remove a DIMM, follow these steps: 1. Observe the safety and ESD precautions at the beginning of this book. 2. Turn off all peripheral devices connected to the server. Turn off the server. 3. Remove the AC power cord from the server. 4. Remove the server's cover. 5. Open the retaining clips at each end of the socket. The DIMM lifts from the socket. 6. Holding the DIMM by the edges, lift it from the socket, and store it in an anti-static package. 7. Reinstall and reconnect any parts you removed or disconnected to reach the DIMM sockets. 8. Replace the server's cover and reconnect the AC power cord. Installing or Replacing the Processor NOTES Use the instructions provided below to install or replace a processor instead of using the instructions that came with the processor. CAUTIONS Processor must be appropriate: You may damage the server board if you install a processor that is inappropriate for your server. See Supported Processors. ESD and handling processors: Reduce the risk of electrostatic discharge (ESD) damage to the processor by doing the following: (1) Touch the metal chassis before touching the processor or server board. Keep part of your body in contact with the metal chassis to dissipate the static charge while handling the processor. (2) Avoid moving around unnecessarily. Intel® Server Board SE7520AF2 User Guide 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
Hardware Installations and Upgrades
Intel® Server Board SE7520AF2 User Guide
13
Removing DIMMs
To remove a DIMM, follow these steps:
1.
Observe the safety and ESD precautions at the beginning of this book.
2.
Turn off all peripheral devices connected to the server.
Turn off the server.
3.
Remove the AC power cord from the server.
4.
Remove the server’s cover.
5.
Open the retaining clips at each end of the socket. The DIMM lifts from the socket.
6.
Holding the DIMM by the edges, lift it from the socket, and store it in an anti-static package.
7.
Reinstall and reconnect any parts you removed or disconnected to reach the DIMM sockets.
8.
Replace the server’s cover and reconnect the AC power cord.
Installing or Replacing the Processor
NOTES
Use the instructions provided below to install or replace a processor instead
of using the instructions that came with the processor.
CAUTIONS
Processor must be appropriate:
You may damage the server board if
you install a processor that is inappropriate for your server.
See
Supported
Processors
.
ESD and handling processors:
Reduce the risk of electrostatic
discharge (ESD) damage to the processor by doing the following:
(1) Touch
the metal chassis before touching the processor or server board.
Keep part of
your body in contact with the metal chassis to dissipate the static charge
while handling the processor.
(2) Avoid moving around unnecessarily.