Intel SR1500AL User Guide - Page 81
Installing the Backplane Board
![]() |
View all Intel SR1500AL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
6. Loosen the captive screw on the backplane board (see letter "A" in the figure below). 7. Hold the backplane board only by the edges. Slide the backplane board to the right to release it (see letter "B" in the figure below). 8. Lift the backplane board over the retention pins (see letter "C" in the figure below) and out of the server system (see letter "D" in the figure below). C D B A AF000370 Figure 49. Removing the Backplane from the Server System Installing the Backplane Board 1. Observe the safety and ESD precautions at the beginning of this book. See "Safety Information". 2. Power down the server and unplug all peripheral devices and the AC power cable(s). 3. Remove the server system cover. For instructions, see "Removing the System Cover". 4. Lower the backplane board into the system (see letter "A" in the figure below) and position the backplane board over the retention pins as shown (see letter "B"). 5. Slide the backplane board to the left (see letter "C") to lock it in place and tighten the captive screw (see letter "D"). Intel® Server System SR1500AL User's Guide 59
![](/manual_guide/products/intel-sr1500al-user-guide-f7ce686/81.png)