Intel SR1500AL User Guide - Page 93
Removing the Rack Handles
View all Intel SR1500AL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
AF000377 Figure 61. I Installing the Rack Handle 6. Install the server system cover. For instructions, see "Installing the System Cover". 7. Install the front bezel. For instructions, see "Installing the Front Bezel". 8. Plug all peripheral devices and the AC power cable(s) into the server. Removing the Rack Handles 1. Observe the safety and ESD precautions at the beginning of this book. See "Safety Information". 2. Power down the server and unplug all peripheral devices and the AC power cable(s). 3. Remove the front bezel if it is installed. For instructions, see "Removing the Front Bezel". 4. Remove the server system cover. For instructions, see "Removing the System Cover". 5. Remove the two screws holding the rack handle in place, and remove the rack handle from the server system as shown in the figure below. Intel® Server System SR1500AL User's Guide 71