Intel SR1560SFHS Service Guide - Page 77
Replacing a System Fan
![]() |
UPC - 735858197595
View all Intel SR1560SFHS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
6. Slide the replacement control panel into the server system (see letter "A") until it clicks into place. 7. Route the USB and front panel cables through the retaining clip on the fan board (see letter "B"). 8. Connect the front panel cable to the connector on the server board (see letter "C"). 9. Connect the USB cable to the connector on the server board (see letter "D"). D B A C AF002345 Figure 62. Installing Control Panel Module into the Server System (Fixed Drive System) Replacing a System Fan Caution: The system fans operate at extremely fast speeds; the fans are NOT hot-swappable. Before removing or replacing a fan, you must first take the server out of service, turn off all peripheral devices connected to the system, turn off the system by pressing the power button, and unplug the AC power cord from the system or wall outlet. Note: The fans that are integrated into the power supply cannot be replaced separately. If one of the fans in the power supply fails, the power supply must be replaced. The system fans at the front of the Intel® Server System SR1560SF can be individually replaced if one of them fails. Use the steps below to replace a fan. Intel® Server System SR1560SF Service Guide 55
![](/manual_guide/products/intel-sr1560sfhs-service-guide-98e76eb/77.png)