Intel SSR316MJ2 Product Specification - Page 17
System Board Feature Set - motherboard
View all Intel SSR316MJ2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Intel® Storage System SSR316MJ2 TPS Feature Summary 1.2 System Board Feature Set The Intel® System Board SE7501HG2 provides the following feature set, as implemented in the Storage System SSR316MJ2: Feature Processors Memory Description Dual Socket Support for FC-mPGA2P (533 MHz 604 pin) Intel® Xeon™ processors Six 184-pin DDR SDRAM Dual Inline Memory Module (DIMM) sockets Support for up to 12 GB Registered Error Correcting Code (ECC) system memory Storage System SSR316MJ2 ships with 2 x 256 MB DIMMs (512 MB) installed - will support 2 TB of raw storage Support for single-sided or double-sided DIMMs (DDR266) o DDR266 memory supports the Intel® Pentium® 4 Processor with a 533 MHz system bus frequency. NOTE: Intel® Storage System SSR316MJ2 memory upgrade guideline - Chipset Peripheral Interfaces LAN Fans Required (for functionality): 100 MB plus 200 MB per 1 TB of raw storage installed. Example: for 16 x 250 GB drives, memory requirements = 100 MB + (200 MB x 4) = 900 MB, therefore 1 GB. Recommended (for optimum performance): 128 MB per 250 GB drive installed. Example: 128 MB x 16 = 2 GB. Intel® E7501 chipset, consisting of: Intel® E7501 Memory Controller Hub (MCH) Intel® P64H2 PCI/PCI-X 64-bit Controller Hub 2 Intel® ICH3-S I/O Controller Hub (ICH) Intel® 8 Mb (1 MB) Firmware Hub (FWH) Three separate and independent PCI buses for high through put of data: • Segment A: 32-bit, 33 MHz, 5 V, Full-length PCI (P32-A) with one embedded devices: o Three slots: 32-bit/33 MHz PCI Slot (PCI Slot 4, Slot 5 and Slot 6) SATA HBA installed Slot 4. Slot 5 & 6 empty. • Segment B: 64-bit, 100 MHz, 3.3 V, Full-length PCI (P64-B) supporting the following configuration: o Two slots: 64-bit/100 MHz PCI-X Slots (PCI-X Slot 2 and Slot 3) SATA HBA's installed in Slot 2 & 3. • Segment C: 64-bit, 133 MHz, 3.3 V, Full-length PCI (P64-C) supporting the following configuration: o One slot: 64-bit/133 MHz PCI-X Slots (PCI-X Slot 1) Slot 1 should be reserved for either an optional Dual/Quad GigE card or optional Fibre Channel HBA card. Dual channel Intel® 82546EB Gigabit Ethernet Controller on motherboard One serial port Two IDE interfaces with Ultra33, 66 and 100 Direct Memory Acess (DMA) mode (used for Compact Flash®) Intel® 82546EB Dual 10/100/1000 Megabits per second (Mbps) Ethernet Local Area Network (LAN) Controller Support for three system fans Revision 1.0 7 Intel Order number C75916-001