Intel SSR316MJ2 Product Specification - Page 28

Feature Summary Intel® Storage System SSR316MJ2 TPS 1.11.1 Front Panel Controls and Indicators The front panel controls and indicators are defined below: Table 4. Control Button Functions Power/Sleep button Reset button Toggles the system power on/off. Sleep button for Advanced Configuration and Power Interface (ACPI) compatible operating systems. Reboots and initializes the system. Table 5. LED Indicator Status NIC 1 Activity LED Continuous green light indicates a link between the system and the network to which it is connected. Blinking green light indicates network activity. NIC 2 Activity LED Continuous green light indicates a link between the system and the network to which it is connected. Blinking green light indicates network activity. Power LED Continuous green light indicates the system has power applied to it. Blinking green light (Note 1) indicates the system is sleeping. No light indicates the system does not have power applied to it (other than 5 V standby power). Primary Compact Flash Slot Activity LED Random blinking green light indicates Primary Compact Flash slot activity. No light indicates no Compact Flash Memory Card activity. Secondary Random blinking green light indicates Secondary Compact Flash slot activity. Compact Flash Slot No light indicates no Compact Flash Memory Card activity. Activity LED ID LED The blue system identification LED is used to help identify a system for servicing. This is especially useful when the system is installed within a high density rack or cabinet that is populated with several similar systems. The system ID LED is illuminated when the System ID button on the front panel is pressed or it can be illuminated remotely through system management software. It is powered from 5VSB to enable indication while the system is in an off state. Illuminating the ID LED on the front panel will also illuminate the rear panel ID LED. Notes: ƒ The amber status takes precedence over the green status. When the amber LED is on or blinking, the green LED is off. 1.12 Fan Monitoring The fans provided in the Storage System SSR316MJ2 contain a tachometer signal that can be monitored by the SAN management software. 1.13 Storage System Security The storage system includes a preinstalled intrusion switch that can be monitored by SAN management software. When the cover is opened, the switch, located on the left side of the chassis transmits a signal to the Baseboard Management Controller (BMC) on the system 18 Revision 1.0 Intel Order number C75916-001