Intel STL2 Quick Start Guide - Page 17
Memory, Installed DIMMs must be the same speed and must all be registered. - motherboard
UPC - 735858140256
View all Intel STL2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Memory Only PC133-compliant SDRAM is supported by the server board. Install from 64 MB to 4 GB of registered, ECC memory, using up to four single- or doublebanked DIMMs. DIMMs must be installed in order from slot 1 to slot 4, no empty slots between installed DIMMs. Slot 1 is the slot farthest from the processors. Installed DIMMs must be the same speed and must all be registered. For a list of supported memory, call your service representative or visit the Intel Support website: http://support.intel.com/support/motherboards/server/STL2/compat.htm 4321 OM10673 Intel Server Board STL2 Quick Start Guide 17
Intel Server Board STL2 Quick Start Guide
17
Memory
Only PC133-compliant SDRAM is supported by the server board.
Install from
64 MB to 4 GB of registered, ECC memory, using up to four single- or double-
banked DIMMs.
DIMMs must be installed in order from slot 1 to slot 4, no empty slots between
installed DIMMs.
Slot 1 is the slot farthest from the processors.
Installed DIMMs must be the same speed and must all be registered.
For a list
of supported memory, call your service representative or visit the Intel Support
website:
OM10673
2
1
4
3