Intel STL2 Quick Start Guide - Page 3

Items Provided on the Bootable CD-ROM Intel Server Board STL2 Product Guide Intel ® SC5000 Server Chassis Subassembly Product Guide Software drivers and utilities To view the product guides, boot to Windows† 95/Windows NT† / Windows 98 / Windows 2000 and use Adobe† Acrobat†. Safety and Regulatory Compliance See the Intel Server Board STL2 Product Guide for product Safety and EMC regulatory compliance information. Intended uses: This product was evaluated for use in servers that will be installed in offices, computer rooms, and similar locations. Other uses require further evaluation. EMC testing: Before computer integration, make sure that the chassis, power supply, and other modules have passed EMC testing using a server board with a microprocessor from the same family (or higher) and operating at the same (or higher) speed as the microprocessor used on this server board. Server board diagram label provided: Place the label inside the chassis in an easy-to-see location, preferably oriented similarly to the server board. I/O panel label provided: Place the label on the I/O shield. The cut outs are for the top serial port and the parallel port. Minimum Hardware Requirements To avoid integration difficulties and possible board damage, your system must meet the following minimum requirements. For a list of qualified memory and chassis components see http://support.intel.com/support/motherboards/server/STL2/compat.htm Processor Minimum of one Intel® Pentium® III processor and a processor terminator. Memory Minimum of 64 MB of 133 MHz, 3.3 V, ECC, PC/133 compliant registered SDRAM on 168 pin gold DIMMs. Power Supply Minimum of 300 W with 0.8 A +5 V standby current (in order to support Wake On LAN† (WOL)). You must provide standby current, or the board will not boot. Intel Server Board STL2 Quick Start Guide 3