Intermec CV41 Intermec Terminal Emulator (ITE) User Guide - Page 70

Chapter 2 - Configuring and Managing ITE Moving the Cursor Location by Tapping the Screen You can move the cursor location by pressing Tab, which moves the cursor to the beginning of the next entry field. You can also enable the Focus via Touch Panel feature, which moves the cursor to any entry field when you tap the computer screen at the field location. Focus via Touch Panel is disabled by default and applies to all sessions when enabled. To enable Focus via Touch Panel 1 Open the Intermec Terminal Emulation main menu in Intermec Settings. For help, see "To configure ITE directly on the computer" on page 21. 2 Tap Focus via Touch Panel. 3 Select Enable. 4 Tap OK. About the Focus via Touch Panel Feature For VT/ANSI sessions: • Focus via Touch Panel is not supported when the application is in Block mode. • The entire screen is defined as a field unless you are using VT340+ form commands. • For 3270, 5250, or VT forms, tap the entry field to move the cursor to the first position in that field. Tapping the screen outside an entry field does not move the cursor. Note: Focus via Touch Panel is ignored if Copy/Paste is enabled. 58 Intermec Terminal Emulator (ITE) User Guide