Intermec PF2i PF2i and PF4i Mid-Range Printer User's Manual - Page 159
Accessories for the Printer, Integral Liner Takeup Unit, Paper Cutter PF4i, Only, Media Supply Hub
View all Intermec PF2i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
Appendix A - Specifications Accessories for the Printer You can use these accessories (sold and ordered separately) with the printer. To order accessories, contact your local Intermec sales representative. Integral Liner Takeup Unit Use this accessory, which comes with a guide shaft, for peel-off (selfstrip) printing. Paper Cutter (PF4i, Only) Use this accessory to cut off continuous paper-based stock or liner between labels. You can collect the cut-off labels, tickets, or tags in an optional tray. If you are running Fingerprint or Direct Protocol, you can control the paper cutter using the commands CUT, CUT ON, and CUT OFF. For help, see the Intermec Fingerprint Command Reference Manual. Media Supply Hub Use the rotating media supply hub for media roll cores with an internal diameter of 38 to 40 mm (1.5 in). Transfer Ribbon Mechanism (PF2i, Only) Use the transfer ribbon mechanism to load ribbon for thermal transfer printing. For help, see "Loading Ribbon" on page 30. 76 mm (3-in) Adapter Use the 76 mm (3-in) adapter with a rotating media supply hub to use media rolls with 76 mm (3-in) inner diameter cores. The adapter cannot be used with a media supply roll post. Label Taken Sensor The label taken sensor (LTS) is a photoelectric sensor that enables the printer's firmware to detect if the last printed label, ticket, tag, etc. has been removed before printing another copy. The LTS cannot be used with a paper cutter. If you are running Fingerprint or Direct Protocol, you can enable or disable the LTS using the commands LTS& ON and LTS& OFF. For help, see the Intermec Fingerprint Command Reference Manual. PF2i and PF4i Mid-Range Printer User's Manual 145