Intermec PF2i PF2i and PF4i Mid-Range Printer User's Manual - Page 59
Setup, NETWORK, NETWORK TYPE, ETHERNET, I/O net1, Enter - default password
View all Intermec PF2i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Chapter 2 - Connecting the Printer To connect your printer to your Ethernet network 1 Make sure that Ethernet is selected as your Network Type. a On the keypad, press T to enter the Setup menu. b Go to SETUP > NETWORK > NETWORK TYPE > ETHERNET. c Press T again to exit the Setup menu. 2 Connect the cable from your Ethernet network to the Ethernet port on your printer's back plate. 3 Turn your printer off and then on. 4 Enter Information mode by pressing the I button. The printer displays interface information in five-second intervals. Note the IP address displayed under I/O net1. 5 On your PC, start your web browser. 6 Enter the IP address of your printer in the address field and press Enter. Your printer home page appears. 7 When you are prompted to enter a login and password. The default values are: login = admin, password = pass. For help using the printer web page to configure your printer, see "Configuring Your Printer From the Printer Home Page" on page 64. PF2i and PF4i Mid-Range Printer User's Manual 45